Welcome to Interiors Seating - The name for world class seating

Specialists in replica Cobra Interiors including Seats, Dash and Door Cards

Tel:- (01623) 400660

Interiors Vehicle Seating is part of Interiors Foam LTD , Registered In England No. 04672814
Address: Unit 4b Botany Commercial Park, Mansfield, Nottinghamshire, NG18 5NF

Home

Our highly trained and experienced staff offers the highest quality and reliability you can count on. In addition, our friendly and professional staff are always here to offer advice or answer any questions you may have about our company or our services. At Interiors Vehicle Seating our goal is to provide you with courteous, expedient, professional service of the highest calibre.  Interiors Seating is the name you can trust for your interior needs whether you require seats or sound deadening, carpet sets or harnesses we are the name that everyone is talking about.

IVA COMPLIANT
Replica Cobra Seat

Stockists of

Sabelt has been putting quality first for thirty years. A winning philosophy has resulted in excellence and given life to products that have always been synonymous with high performance and maximum safety. Mainstays that accompanied racing greats of the past such as Piquet, Prost, Senna, Mansell and Irvine in their victories; and number ones of today such as Schumacher and Barrichello; as well as the teams like Ferrari F1, Alfa Romeo, Ford Rallye Sport, Subaru World Rally Team, Hyundai World Rally Team and many others. Side by side with the drivers and their teams, Sabelt research is in progress to meet new goals. This year, the objectives met have taken shape in the latest generation of racing suits, and the innovative line of shoes, among which are the new racing shoes. Products and accessories destined, as always, to end up on the podium. Sabelt harnesses have always been in pole position. In fact, they have been chosen and used by the most important Formula 1 and Rally teams - Ferrari, Toyota, Minardi, Ford, Mitsubishi, Subaru and Hyundai, just to name a few. Leadership in the field is based on the use of first rate materials and continuous study in the Research and Development sector to assure the highest levels of performance and safety. Sabelt research doesn’t stop when its goals are achieved; it forges ahead along with the demands of motorsport. Sabelt was founded in 1972 by Piero and Giorgio Marsiaj, starting as Britax licensee and quickly became the most important manufacturer of car seat belts in Italy. In 1976, in order to standardize the release system under FISA request, Sabelt introduced the rotary cam buckle. It was also around this time that the Company developed the first special harnesses for single seater cars and for saloon. In 1977 Sabelt produced 1.000.000 seatbelts. In 1981, also in Italy seatbelt became compulsory on new car models. In 1985 majority of Sabelt was bought by TRW USA, one of the Top Ten major automotive supplier. In 1989, seatbelts became compulsory on every car model. Sabelt has always been involved from the very beginning in child safety (for few years also as a complete child seat manufacturer). From mid 90's Sabelt concentrate its efforts to become a leading child restrain safety systems developer and manufacturer. In 1999, Sabelt reached an agreement with TRW to buy back the racing harness business beside which to start the development of a complete range of safety products dedicated to racing. In 2001, Sabelt developed and started producing a new fashion shoes line. Thanks to the innovative range of products in child restraint and racing field, in few years Sabelt has become a sector leader and one of the most important manufacturer in the World (more than 2,5 millions buckles produced in 2004.

The Dynamat brand is synonymous with sound proofing the world over. Dynamat are one of the only brands in the world who have done specific research and development for sound proofing vehicles in an automotive environment. The result of course is that each and every Dynamat product is tailored for the environment it was originally intended for. Dynamat are one of the few sound deadening manufacturers with not only a complete range, but one completely dedicated to in car use. With products varying from small kits for a particular speaker application al the way up to products to damp out engine noise. When it comes to making your ride like a luxury car, Dynamat does the job. Dynamat is used by the world's top hot rod and custom builders because they know it makes their cars ride cool and quiet. Dynamat makes cars feel solid - doors and trunks slam snug, rain and wind virtually disappear and your interior becomes a quiet, comfortable cruising environment. Use Dynamat on the interior sheet metal of your vehicle to stop vibration and reduce road noise. Add a Dynamat brand thermo acoustic liners- such as Dynaliner to fight heat and low frequency hums from big engines and exhaust systems - and you've got the ultimate ride. Dynamat is the ultimate automotive accessory. Dynamat is the most trusted name for ultimate sound and noise control. Dynamat is recognized by consumers worldwide as the top quality product for solutions to unwanted noise and vibration. Don't settle for cheaper, less effective copy cats. They've spent more than 15 years continually engineering and testing their products to ensure they deliver the premium acoustic products on the market. Get the best solution for your acoustic needs - get Dynamat. Dynamat is sold in over 5,000 stores in more than 50 countries worldwide. Installing Dynamat requires only a few tools: razor knife or scissors, roller tool, rags and a solvent-based cleaner (rubbing alcohol also works). When installing Dynaliner or Extremeliner on vertical or upside-down surfaces, you will need a spray adhesive. An upholstery adhesive is best. You also need basic hand tools for the disassembly and reassembly of your vehicle. Heat coming from a hot exhaust or headers is a common problem. Fortunately, Dynamic Control has a solution. First apply Dynamat Xtreme to the floor and firewall, then install Extremeliner, both underneath the floor's carpet. We recommend applying Dynamat to any surface you can easily reach. In general, we recommend treating your vehicle in the following order: Doors, Boot, Rear Deck, Floors, Roof, Bonnet, then Bumpers. Dynamat Xtreme is the best performing material for controlling vibration. Dynamat Xtreme damps four times better than Dynamat Original and weighs at least 50% less and is used by the McLaren Formula 1 team. Dynamat Xtreme's aluminum constraining top layer also makes it well suited for situations where heat is a problem, such as on the floor and firewall near an exhaust or header. Dynamat Xtreme is recommended anywhere Dynamat can be applied. It requires no heat for installation, making it a good choice for home mechanics. As a car operates, it generates noise. This noise is caused by the transference of energy (vibration) from the internal components and from the road to the chassis of the vehicle. The chassis (doors, floors, roof etc.) transforms this vibration into audible noise. Dynamat transforms the energy (vibration) into silent energy. Even a small amount of Dynamat can cause a profound noise reduction. For example, applying Dynamat to the doors of your vehicle can reduce road noise from 3-6dB! Complete coverage of an average vehicle can reduce road noise 9, 12 even as much as 18dB. You can apply Dynamat in patches (25-50% area coverage) to keep a specific panel from resonating or you can apply it over an entire area (such as the floor, doors, or trunk) to create a sound barrier and thermal insulator. Dynamat is a thin, flexible, easy to cut and mould sheet that actually stops noise causing resonance and vibration, by using visco-elastic qualities that promote vibro-acoustic energy conversion. In short, that means noise becomes silent energy.

Interiors Seating specialize in the crafting of replica cobra interiors.  We also supply seats for the classic car, replica car, kit car and motor home whether it be a MK, Sumo, Healey or a Westfield. We also build seats for narrow bodied cars. All of our frames are made from steel tube and not from fibreglass like other inferior products. Your seat also has the option of being fitted with a head rest for extra comfort. We also take care of the whole interior including the dash board, door cards and any other trim that needs covering in either leather or vinyl. We also offer a re-trim and repair service for all parts of your interior.

We also stock Dynamat Car Sound Deadening Solutions.  Dynamat is the ultimate automotive accessory and is the most trusted name for ultimate sound and noise control. Dynamat is recognized by consumers worldwide as the top quality product for solutions to unwanted noise and vibration.

Please have a good look around our extensive website to see more information about Interiors Seating and the quality seats and interiors we hand craft to exacting standards. If you have any questions or would like to speak with an Interiors Seating representative regarding our products or services and to find out which seat is best for your project, please e-mail us  or call us on (01623) 400 660.

When it comes to harnesses Sabelt are the only real choice.  They have been putting quality first for over 30 years and are a brand you know you can trsut.  We stock a range of Sabelt harnesses which are suitable for the seats we craft to exacting standards.  Top quality harnesses for your top quality seats, a perfect and trustworthy combination.

ARE YOU READY FOR THE NEW I.V.A. REGULATIONS?

The new VOSA IVA regulations come into force on April the 1st.  There are a few important changes including new seat regulations.  Are you ready for the new requiements?  Thankfully here at Interiors Vehicle Seating we have got it all sorted for you.  We have developed a new replica Cobra seat which conforms to the new regulations called the RX1191 IVA.  Our RX1380 seat, a narrow recliner seat with exta side support designed for open top tourers, meets the new regulations as does the RX777 designed for 7 replicas.

Come and see us at the Detling Kitcar and Car Builder Show on the 12th and 13th of April.  We will be on stand T14 with our full replica Cobra interior and on hand with full details about the new IVA regulations and stock seats for you take away with you.

(NEW)  RX1191 IVA